Pressure Measurement

TwitterFacebookLinkedInGoogleRSS

Home | Dial Indicating Pressure Gauges | 100 Series ABS & Steel Case

 

100 Series ABS & Steel Case, Dry Pressure Gauges

 

 

  • General purpose non-fillable dry gauge
  • Vacuum and compound ranges through 0 psi to 15,000 psi
  • 1-1/2", 2", 2-1/2" and 4" gauge sizes
  • Standard impact-resistant ABS & steel case
  • Copper alloy and brass wetted parts

This product contains a chemical that is regulated under California Proposition 65.

Dimensions Tech Manuals Options Print Catalog Page

 

ORDERING INFORMATION

SIZES 15 1-1/2" 20 2" 25 2-1/2" 40 4"
CASE TYPES 100 ABS, bottom connection 120 Steel case panel mount        
110 ABS, back connection 148 Square ABS, panel mount (2" only)
PRESSURE
RANGES
30vac -30 inHg to 0 psi 30/300 -30 inHg to 0 to 300 psi 200 0 psi to 200 psi 2000 0 psi to 2,000 psi
30/15 -30 inHg to 0 to 15 psi 15 0 psi to 15 psi 300 0 psi to 300 psi 3000 0 psi to 3,000 psi
30/30 -30 inHg to 0 to 30 psi 30 0 psi to 30 psi 400 0 psi to 400 psi 5000 0 psi to 5,000 psi
30/60 -30 inHg to 0 to 60 psi 60 0 psi to 60 psi 600 0 psi to 600 psi 6000 0 psi to 6,000 psi
30/100 -30 inHg to 0 to 100 psi 100 0 psi to 100 psi 1000 0 psi to 1,000 psi 10000 0 psi to 10,000 psi
30/160 -30 inHg to 0 to 160 psi 160 0 psi to 160 psi 1500 0 psi to 1,500 psi 15000 0 psi to 15,000 psi
30/200 -30 inHg to 0 to 200 psi Other ranges available on request
SCALE OPTIONS*** psi psi single scale psi/kPa psi/kPa dual scale psi/kg/cm2 psi/kg/cm2 dual scale psi/bar psi/bar dual scale
CONNECTION
SIZES
1/8 1/8″ NPT SST SAE J1926-3:7/16-20 Adjustable   1/4 1/4" NPT
OPTIONS PMC Panel Mount Clamp SSC Stainless Steel Case LL Polycarbonate Lens SST Stainless Steel Tagging
SSB Polished Stainless Steel Bezel CRC Chrome Case GL Glass Lens* CPO Brass Sintered Orifice 20 Micron
BLRF Black Rear Flange FAC Flat Sided ABS Case SG Safety Glass Lens* BP1 Brass Press Fit Orifice 0.1 mm
BLFF Black Front Flange – ABS Case BCR Black Cover Ring** HL Homalite Lens* BP3 Brass Press Fit Orifice 0.3 mm
CFF Chrome Front Flange – ABS Case SSCR Stainless Steel Cover Ring** SP Red Set Pointer** BP8 Brass Press Fit Orifice 0.8 mm
SBFF Black Front Flange – Steel Case CCR Chrome Cover Ring** MIP Maximum Indicating Pointer
SCFF Chrome Front Flange – Steel Case PCCR Polished Chrome Cover Ring** SDM Silicone Dampened Movement
BSC Black Steel Case CAR Chrome Adapter Ring* LM Laser Marking
* A steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
** Only 110 Models require a steel, stainless or chrome case & cover ring to be additionally ordered when utilizing a set pointer or cover ring. Please consult factory when a set pointer is to be utilized on a 120 Model.
*** Other ranges available on request

   Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
   NOTE: Refer to 100 Series Options & Accessories for availability by model number.


WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2018 NOSHOK. ALL RIGHTS RESERVED.