Home > OEM Pressure Transmitters & Transducers > 630 Series Hall Effect Pressure Transducers > Product Specifications
630 Series Hall Effect Pressure Transducers
Product Specifications
| SPECIFICATIONS | |
| Output Signals | 0 Vdc to 5 Vdc, 3-wire; 0 Vdc to 10 Vdc, 3-wire; 1 Vdc to 5 Vdc, 3-wire .5 Vdc to 4.5 Vdc, 3-wire ratio-metric to the power supply |
| Accuracy | ± 1 % Full Scale (Full Scale Typical) Includes the combined effects of linearity, hysteresis and repeatability |
| Hysteresis Repeatability Stability |
≤ ± 0.4% Full scale ≤ ± 0.06% Full scale ≤ ± 0.4% Full Scale for 1 year, non-accumulating |
| Pressure Ranges | Standard gauge ranges from vacuum through 300 psig |
| Proof Pressure | 3 times Full scale for ranges 0 psi to 2 psi through 0 psi to 100 psi 2 times Full scale for ranges 0 psi to 150 psi through 0 psi to 300 psi |
| Power Supply | 9 Vdc to 30 Vdc for 0 Vdc to 5 Vdc, 3-wire, unregulated 1 Vdc to 5 Vdc, 3-wire, unregulated 12 Vdc to 30 Vdc for 0 Vdc to 10 Vdc, 3-wire, unregulated 5 Vdc ± 10% for 0.5 Vdc to 4.5 Vdc, 3-wire ratiometric, unregulated |
| Load Limitations | ≤ 10,000 Ω for 0 Vdc to 10 Vdc, 3-wire ≤ 5,000 Ω for 0 Vdc to 5 Vdc, 3-wire; 1 Vdc to 5 Vdc, 3-wire ≤ 4,500 Ω for 0.5 Vdc to 4.5 Vdc, 3-wire ratiometric |
| Wetted Materials | Nickel-Copper diaphragm (ranges up through 0 psig to 30 psig) and Nickel-Beryllium diaphragm (ranges greater than 0 psig 10 30 psig) and Copper alloy body |
| Housing Material | Copper allow with Polyamid to cap |
| Temperature Ranges | Compensated -4°F to 176°F (-20°C to 80°C) Zero effect ± 0.022% Full scale/°F Span effect ± 0.011% Full scale/°F Ambient -20°F to 176°F (-20°C to 80°C) Media -20°F to 176°F (-20°C to 80°C) Storage -40°F to 212F (-40°C to 100°C) |
| Environmental Rating | IP67, NEMA 4X according to EN 60529/IEC529 |
| Electrical Protection | Reverse polarity, over-voltage and short circuit protection |
| Weight | Approximately 3.5 oz. |


