Force Measurement
Home | Mechanical Force Measurement | 3000 Series 80 cm2 Nominal Diameter
3000 Series 80 cm2 Nominal Diameter Hydraulic Load Cell
- Designed for measuring axial loads and bearing forces
- Ranges from 360 lbf to 70,000 lbf
- Lateral forces with an angle of ± 3° can be regarded as negligible which allows the 3000 series
to provide the highest degree of accuracy - Accuracy levels range from ±0.125% full scale (BFSL) to ±1.5% full scale, depending on the
measuring instrument - Various flexible and rigid tubing options allow easy installation in challenging application
environments - Durable stainless steel housing and self adapting piston provide exceptional corrosion resistance
and durability - A high quality NOSHOK 300 or 901 series pressure gauge or 100, 200 or 615 series transducer
is directly mounted to the load cell for precise measurement indication - Operates without an external power supply when using a pressure gauge for indication
- Provides an extremely high degree of accuracy because the load cell is vacuum filled and
sealed, eliminating the error that can be caused by entrapped air - Steel jacketed flexible tubing and capillary systems are offered to accommodate
applications that require remote mounting of the gauge or transducer - An optional fluid filled gauge dampens the effects of pulsation, vibration and shock, and lubricates
the gauge internals for extended service life - Various output signals available in transducer models that are CE compliant
- See the Instrument Connection Diagram
ORDERING INFORMATION
| LOAD CELL | 3080 | ND 80 - Compression - standard design | ||||
| MEASURING RANGES | 360A | 360 lbf | 3500A | 3,500 lbf | 10000A | 10,000 lbf |
| 700A | 700 lbf | 5000A | 5,000 lbf | 18000A | 18,000 lbf | |
| 2000A | 2,000 lbf | 6000A | 6,000 lbf | 36000A | 36,000 lbf | |
| 2500A | 2,500 lbf | 9000A | 9,000 lbf | 70000A | 70,000 lbf | |
| Other ranges available, please consult factory. | ||||||
| INSTRUMENTS | 1 | 25-300 Series gauge | 6 | 100 Series transmitter | 8 | 615 Series transducer |
| 4 | 40-400 Series gauge | 7 | 200 Series transducer | |||
| INSTRUMENT CONNECTIONS* | A | Bottom | C | Right side | E | None** |
| B | Top | D | Left side | |||
| 25-300 SERIES GAUGE OPTIONS |
40-400 SERIES GAUGE OPTIONS |
100 SERIES TRANSMITTER OPTIONS |
200 SERIES TRANSDUCER OPTION |
615 SERIES TRANSDUCER OPTIONS |
|||
| 0 No options | 0 No options | Accuracy | Accuracy | Accuracy | |||
| 1 Dry gauge | 1 Glycrine filled | 1 0.50% | 1 0.50% | 1 0.25% | |||
| 2 Max. indicating pointer | 2 Max. indicating pointer | 2 0.25% | 2 0.25% | 2 0.125% | |||
| 3 Set pointer | 3 Set pointer | Output | Output | Output | |||
| 4 Rubber case protector | 8 SS rear flange | 1 4 mA to 20 mA | 2 0 Vdc to 5 Vdc | 1 4 mA to 20 mA | |||
| 5 Glass overlay | Electrical Connection | 3 1 Vdc to 5 Vdc | 2 0 Vdc to 5 Vdc | ||||
| 6 Safety glass overlay | 1 Option 7 with 36" cable | 5 0 Vdc to 10 Vdc | 3 1 Vdc to 5 Vdc | ||||
| 3 6-pin Bendix | Electrical Connection | 5 0 Vdc to 10 Vdc | |||||
| 6 1/2" NPT conduit w /36" cable | 1 Option 7 with 36" cable | Electrical Connection | |||||
| 7 Mini-Hirschmann | 3 6-pin Bendix | 1 Option 8 with 36" cable | |||||
| 25 M12 x 1 (4-pin) | 6 1/2" NPT conduit w/ 36" cable | 3 6-pin Bendix | |||||
| 7 Mini-Hirschmann | 6 1/2" NPT conduit w /36" cable | ||||||
| 25 M12 x 1 (4-pin) | 8 Hirschmann | ||||||
| 25 M12 x 1 (4-pin) | |||||||
| CONNECTING TYPES | 0 | Direct | 2 | 100 mm SS spacer | |||
| 1 | 50 mm SS spacer | 3 | Capillary w/ spiral protective sleeve | ||||
| CAPILLARY LENGTH | ## Specify in feet (for options 3 and 4) | ||||||
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
* Refer to Instrument Connection diagram
** Not required for transmitters, switches, or any instrument other than a dial indicating gauge.