| Measurement Solutions Product Guide |
 Order A Catalog NEW Available In Spanish |
| Electronic Measurement Solutions Catalog |
 Order A Catalog |
| Pressure Measurement Solutions Catalog |
 Order A Catalog |
Home > Manifold Valves > 2-Valve Static Pressure & Liquid Level Manifolds > 2602/2702 Series Mini Block & Bleed Hard Seat & Soft Tip
2602/2702 Series
2602/2702 Series
Static Pressure Block & Bleed Mini Manifolds
Hard Seat & Soft Tip
Features & Benefits
- Combine isolating and venting in a single valve, eliminating the need for tubing and fittings
- Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be removed without disturbing the permanent piping installation
- Valves are located on the top to fit into compact spaces and two holes are provided for mounting, venting is to the left
- 100% Helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 2602 Series hard seat valves have 10,000 psi pressure rating (@200°F maximum)
- 2702 Series soft tip valves have 6,000 psi pressure rating (@200°F maximum)
- Blow-out proof stem provides a secondary stem seal in the full open position
- Viton® O-Ring and Teflon® back-up ring stem seals
- All 316 stainless steel stems (even in steel valves) for extended service life
- Stem and bonnet threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Bonnet lock pin to prevent accidental loosening
- Vinyl bonnet and stem dust cap
- 0.141 inch orifice size
Trademark Information
- Grafoil® is a registered trademark of Graftech International
- Viton®, Delrin® and Kalrez® are registered trademarks of DuPont Performance Elastomers
- Teflon® is a registered trademark of DuPont Plastic
- Parco® is a registered trademark of Parco, Inc.
- Simriz® is a registered trademark of Simrit, A Division Of Freudenberk-NOK
- Parker® is a registered trademark of Parker O-Ring Division
- Ketron® is a registered trademark of Quadrant Engineering Plastics
- KEL-F® brand is a registered trademark of 3M. Production of this brand was discontinued in 1995. The only remaining brand, Neoflon®, is made by Daikin Industries of Japan. This PCTFE resin has the same chemical structure and properties as the original KEL-F® brand material.
Click on chart below to enlarge
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2602-FFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available..
Click on chart below to enlarge
