Drop Down Menu Drop Down Menu

Home > Manifold Valve Options & Accessories

Manifold Valve Options & Accessories

• Dielectric Kit
• Futbols
• Swivel Adpaters
• Differential Pressure To Static Plate
• Static Adapters
• Manifold Mounting Kit

Dielectric Kit

DIELECTRIC KIT
The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.  Dielectric Kits provide a non-conductive barrier between the process piping and the instrument and isolate components from the effects of electrical current.  By eliminating metal to metal contact, current is halted to prevent corrosion and aid in the cathodic protection of the system.

• Specifications
  • Material: Delrin®, PVC
  • Max Operating Temp 150°F
  • Dielectric Strength  exceeds 1/32 air arc gap approx 2500 Vdc

[Top of Page]

Futbols

FUTBOLS
Futbols (flange adapters) bolt to the process side of a flange-flange manifold to allow connection of process flange taps or process root valves.  Futbols also allow flanges to be connected to threaded process piping while maintaining the ease of removal or repair of the manifold if maintenance is required.  The futbols provide a 1/16” offset connection from the bolt holes to give connection centers of 2.0, 2.125, or 2.25.

• Specifications
  • Material: yellow zinc dichromate plated steel, 316 stainless steel
  • Connections: ½ NPT
  • Kit Includes : (2) FUTBOLS, (4) hex bolts  7/16-20, (2) Teflon® face seals

[Top of Page]

SWIVEL ADAPTERS
Swivel adapters are used with gauges and gauge valves to adjust the line of site.  The swivel adapter rotates 360° to allow of the connected instrument to be positioned in the desired direction.  The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut.

• Specifications
  • Material: electroless nickel plated 12L14 steel, 316 stainless steel
  • Connections: ½ NPT male - ½ NPT female

[Top of Page]

Δ PRESSURE TO STATIC PLATE
Used in direct mount systems for gas pipelines, the D pressure to static adapter plate is used to mount a differential pressure transmitter and a static pressure transmitter to a five valve flange-flange manifold. They are available in zinc nickel-plated steel, electropolished stainless steel. An integral mini style bleed valve is incorporated in the plate and a ¼” NPT vent plug is provided.   The mini style bleed valve is equipped with a Viton® O-ring and Teflon® back up ring below the stem threads to protect against corrosion and galling. Stem threads are rolled for greater strength and ease of operation and all NOSHOK valves are 100% Helium leak tested for guaranteed reliability. Maximum pressure rating of 10000 psi for steel & stainless models

[Top of Page]

STATIC ADAPTERS
The static adapter is used to join threaded ports to a flange style connection.  They are often used on direct mount systems to join the NPT port of a static transmitter with a flange mounted connection on a D pressure to static adapter plate.  They are available in electroless zinc nickel-plated steel and electropolished stainless steel.

• Specifications
  • Material: zinc nickel-plated steel, 316 stainless steel
  • Connections: ½ NPT male - Flange

[Top of Page]

Manifold Mounting Kit

MANIFOLD MOUNTING KIT

• Designed for direct or remote mounting to a two inch pipe stand
• Can be used with any NOSHOK 2-, 3- or 5-valve manifold by mounting a steel or stainless steel bracket directly to the manifold body

[Top of Page]