Accessories

TwitterFacebookLinkedInGoogleRSS

Home | Pressure Snubbers

 

Pressure Snubbers

Piston-Type Snubbers

Piston-Type Snubbers
  • Resist clogging and are self cleaning
  • Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virutally every application
  • Available in brass and 316 stainless steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"

Click here for specifications

 

 

 

 

Sintered Snubbers

Sintered Snubbers
  • Cost effective solution to protect expensive instrumentation
  • Increases gauge readability by smoothing out pressure surges, pulsations and spikes
  • 5 basic elements available for each snubber to accommodate specific application needs
  • Snubbing action achieved by utilizing a corrosion resistant 316 stainless steel sintered
    porous element
  • Exotic materials or intermediate disc grades available
  • Provides long service life with no moving parts to wear out
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Click here for specifications

 

 


   For products shown that are composed of Brass or Carbon Steel:

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov


   For products shown that are composed of Stainless Steel:

WARNING: This product can expose you to chemicals including Chromium (IV) and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2018 NOSHOK. ALL RIGHTS RESERVED.