Needle & Manifold Valves

TwitterFacebookLinkedInGoogleDeliciousRSS

Home | Manifold Valves | 2180 Series 2-Valve Meter, Soft Seat

 

2180 Series 2-Valve Meter Manifold, Soft Seat

 

  • Designed for use with orifice meters
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • 6,000 psi pressure rating @ 200 °F
  • Replaceable Delrin® seat and straight through porting for bidirectional,
    high capacity flow and easy roddable cleaning
  • Blow-out proof stem provides a secondary stem seal in the full
    open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect
    from corrosion and galling; PTFE packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below
    the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
Dimensions  Print Catalog Page

 

ORDERING INFORMATION

SERIES 2 2-valve        
SEAT 1 Soft seat        
PROCESS TYPE 8 Meter manifold        
CONNECTION 0 1/4" NPT        
VALVE TYPE FFC Female-Female, Steel FFS Female-Female, Stainless Steel    

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2180-FFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM.

ORDERING INFORMATION - Additional Options

PACKINGS P1 PTFE            
STEM TIPS T1 Non-rotating (316 stainless)            
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR    
HANDLES HL3 1" Round knurled HL4 1-3/8" Phenolic HL5 1-3/4" Phenolic    

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

* Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).

The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 2180-FFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2017 NOSHOK. ALL RIGHTS RESERVED.