Manifold Valves

Home » Products » Valves » Manifold Valves » 3-Valve Differential Pressure » 3010/3110 Series 3-Valve Differential Pressure Manifold Valves, Hard Seat & Soft Seat

3010/3110 Series 3-Valve Differential Pressure Manifold Valves, Hard Seat & Soft Seat

REQUEST A QUOTE VIEW BY PART NUMBER
Download Literature
Oil & Gas
  • Available in block, single flange, or double flange connection for remote or direct installation
  • Designed for use with differential pressure transmitters incorporating two isolation valves and an equalizing valve in differential pressure measurement
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 3010 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
  • 3110 Series soft seat valves have 6,000 psi pressure rating @ 200 °F
  • 3110 Series soft seat valves also feature a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES 3 3-valve        
SEAT 0 Hard seat 1 Soft seat    
PROCESS TYPE 1 Differential pressure        
CONNECTION 0 1/2" NPT standard or flange        
VALVE TYPE MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 3110-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option available on the 3110 Series soft seat version.

ORDERING INFORMATION - Additional Options

SOFT SEATS** PK1 PEEK KF1 PCTFE    
PACKINGS† P1 PTFE P2 Graphite    
STEM TIPS T1 Non-rotating (316 stainless) T6 Ball (carbide)** T8 Ball (Monel)**
T5 Ball (440C stainless)** T7 Ball (ceramic)** T9 Non-rotating regulating (316 Stainless)**
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR
HANDLES HL1 1-13/16" Mini "T" HL4 1-3/8" Phenolic    
HL3 1" Round knurled HL5 1-3/4" Phenolic    

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.
* Other o-ring materials available on request.
** For 3010 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).

The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 3110-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 3110-MFC-P1)

NOTE 2: When a packing option is selected, an o-ring option is NOT available.

NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option available on the 3110 Series soft seat version.

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

SPECIFICATIONS
Materials Zinc-nickel plated steel, electropolished 316 Stainless Steel
Connections Flange-flange, 1/2" NPT-flange, 1/2" NPT-1/2" NPT
Pressure ratings Hard Seat: 10,000 psi @ 200 °F
Soft Seat: 6,000 psi @ 200 °F
Orifice size 0.187"
Flow coefficient Hard Seat: CV 0.44
Soft Seat: CV 0.76
Steam seal & type All 316 Stainless Steel stems with FKM o-ring and PTFE back-up ring below the threads, PTFE or Graphite packing optional
Options Panel mountings, o-ring materials, handles, packings, regulating stem and stem tips
Weight Approximately 4.0 lb. without flange,
Approximately 5.0 lb. with flange
Dimensions Download Data Sheet Flow Schematic Frequently Asked Questions Reference Information Trademark Information Warranty Information

Options & Accessories

Installed Options & Accessories

  • Packing
  • PTFE Manifold Gasket Ring (RG1-TF1)
  • Graphite Manifold Gasket (RG1-GF1) 
  • Traditional to Coplanar Flange Adaptor (TCA-S)

Connectors

  • NOSHOK offers non-stabilized and stabilized Connectors, with or without an integral block valve
  • These connectors are designed to reinforce the entire installation by shifting radial-stress load away from the NPT connections
  • Mounted onto the orifice flange or the orifice fitting, connectors are sometimes referred to as a “Root Valve” or primary isolation valve

View NOSHOK Connectors

Dielectric Kits DK Series

Dielectric Kits are designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection. Dielectric Kits provide a non-conductive barrier between the process piping and the instrument and isolate components from the effects of electrical current. By eliminating metal-to-metal contact, current is halted to prevent corrosion and aid in the cathodic protection of the system.

  • One Piece Dielectric Gasket, Pair, Steel, Acetal (DK1)
  • One Piece Dielectric Gasket, Pair with Stainless Steel Bolts, Stainless Steel, Acetal (DK1-SS)
  • PTFE Gasket with Dielectric Shim, Pair, Steel, PTFE, PVC (DK2)

DK1

  • Single piece design combining a Acetal sealing gasket and Acetal dielectric shim
  • Bolts, washers and dielectric bushings are included with the kits
  • Cannot be used in conjunction with seal rings or o-rings
  • Seal rings or o-rings not required

DK2

  • Used as an alternative to a one-piece design when a separate sealing gasket or o-ring is required
  • Two piece design consisting of a PTFE sealing gasket and PVC dielectric shim
  • Bolts, washers and dielectric bushings are included with the kits

Specifications:

  • Material: Acetal, PVC
  • Max operating temp 150 °F
  • Dielectric strength exceeds 1/32 air arc gap approximately 2,500 Vdc

All 316SS products meet the requirements of NACE MR0175/ISO 15156-3.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Differential Pressure Gauges

Differential pressure gauges measure and visually indicate the difference between two pressure points within a process system. NOSHOK offers Piston Type and Diaphragm Type Differential Pressure Gauges.

View NOSHOK Differential Pressure Gauges

Differential Pressure to Differential Pressure Adaptor

NOSHOK Differential Pressure to Differential Pressure Adaptors allow two differential pressure transmitters to be mounted on a single set of orifice taps. This configuration is ideal for applications such as bi-directional flow, and custody transfer where only a single set of orifice taps is available. Multiple adaptors are available for various application configurations and space restrictions.

  • ΔP to ΔP Adaptor - 3/8” Bore, 23” Length, Steel (DP1-DP1-CS)
  • ΔP to ΔP Adaptor - 3/8” Bore, 23” Length, Stainless Steel (DP1-DP1-SS)
  • ΔP to ΔP Adaptor - 3/8” Bore, 9” Length, Steel (DP2-DP2-CS)
  • ΔP to ΔP Adaptor - 3/8” Bore, 9” Length, Stainless Steel (DP2-DP2-SS)

All 316SS products meet the requirements of NACE MR0175/ISO 15156-3.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Direct Connect Assembly For Oil & Gas Applications

The NOSHOK Direct Connect Assembly provides an installation that keeps the meter close to the orifice taps for accurate flow measurements.

View the NOSHOK Direct Connect Assembly

Futbols 50FA1 Series

Futbols (flange adapters) bolt to the process side of a flange-flange manifold to allow connection of process flange taps or process root valves. Futbols also allow flanges to be connected to threaded process piping while maintaining the ease of removal or repair of the manifold if maintenance is required. The futbols provide a 1/16" offset connection from the bolt holes to give connection centers of 2", 2-1/8" or 2-1/4".

Specifications:

  • Carbon Steel Futbol, Pair, Steel (50FA1-CS)
  • Stainless Steel Futbol, Pair, Stainless Steel (50FA1-SS)
  • Material: Zinc-Nickel plated Steel, 316 Stainless Steel
  • Connections: 1/2" NPT
  • Kit Includes: (2) Futbols, (4) hex bolts 7/16"-20, (2) PTFE face seals
  • Weight approximately 2.1 lb.

All 316SS products meet the requirements of NACE MR0175/ISO 15156-3.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Manifold Mounting Kits - 2-Valve & 3-Valve Manifolds

The manifold mounting kit is designed for direct or remote mounting to a two-inch pipe stand. This kit can be used with any NOSHOK 2-valve or 3-valve manifold by mounting a Steel or Stainless Steel bracket directly to the manifold body.

  • Flange - Flange Mounting Kit, Steel (MK1-CS1)
  • Flange - Flange Mounting Kit, 304 Stainless Steel (MK1-SS2)
  • Flange – NPT Mounting Kit, Steel (MK2-CS1)
  • Flange – NPT Mounting Kit, Steel Stainless Steel (MK2-SS2)
  • NPT – NPT Mounting Kit, Steel (MK2-CS1) (For 3-Valve Manifolds Only)
  • NPT – NPT Mounting Kit, Stainless Steel (MK2-SS2) (For 3-Valve Manifolds Only)
  • NPT - NPT Mounting Kit, Steel (MK4-CS1) (For 2-Valve Manifolds Only)
  • NPT – NPT Mounting Kit, 304 Stainless Steel (MK4-SS2) (For 2-Valve Manifolds Only)

2-Valve and 3-Valve Manifold Mounting Kit Dimensions

O-Ring Options

  • Aflas (AF1)*                 
  • Kalrez 3018 (KZ1)*                  
  • Kalrez 4079 (KZ2)*                        
  • Simriz 89D (KZ3)*     
  • Kalrez 7075 (KZ4)*     
  • Elast O Lion (EL1)*                 
  • EPDM 80 (EM1)*
  • EPDM 90 (EM2)*
  • EPDM 70 (EM3)*
  • NBR 70 (NB1)*
  • EPDM 70 (EM1)**
  • Kalrez 4079 (KZ2)**
  • Elast O Lion (EL1)**
  • Low Temperature FKM (VT1)*
  • Low Temperature FKM (VT2)**

* For 1/8" NPT to 1/2" NPT only        
** For 3/4" NPT to 1-1/2" NPT only

Static Adaptors SA Series

The Static Adaptor is used to join threaded ports to a flange style connection. They are often used to join the NPT port of a static transmitter with a flange mounted connection on a Differential Pressure to Static Adaptor Plate. 

  • Static Adaptor, 1/2” Female NPT, Steel (SAC-1)
  • Static Adaptor, 1/2” Female NPT, Stainless Steel (SAS-1)
  • Static Adaptor, 1/2” Male NPT, Steel (SAC-2)
  • Static Adaptor, 1/2” Male NPT, Stainless Steel (SAS-2)

Specifications:

  • Material: Zinc-Nickel plated Steel, 316 Stainless Steel
  • Connections: 1/2" NPT Male-flange, 1/2" NPT Female-flange
  • Other configurations available

All 316SS products meet the requirements of NACE MR0175/ISO 15156-3.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Vertical to Horizontal Adaptor Kit

The Vertical to Horizontal Adaptor Kit converts vertically mounted Stabilized Connectors to a horizontal position for mounting additional valves and instrumentation.

  • Vertical to Horizontal Adaptor Kit, Steel (VHC)
  • Vertical to Horizontal Adaptor Kit, Stainless Steel (VHS)

All 316SS products meet the requirements of NACE MR0175/ISO 15156-3.

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty Information - Accessories

WARNING:This product can expose you to chemicals including Lead and Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Application Insights Articles
Valve Packing Options - Why Use Packing & How To Choose Packing
Valve Packing Options - Why Use Packing & How To Choose Packing
Measurement Solutions For Oil & Gas Applications
Measurement Solutions For Oil & Gas Applications

PT Transmitter Crossover Tool

Convert to PT Series