- Multiport design reduces the number of gauge and other instrument connections to permanent piping installations, decreasing possible leak paths
- Optional bleed plugs further allow pressure to be bled off without disturbing the permanent piping installation
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 6,000 psi pressure rating @ 200 °F
- Replaceable Acetal seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- PCTFE or PEEK soft seat optional
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust cap for bonnet and stem (non-packing)
If you are viewing on a smaller screen or with screen zoom, please use
the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES |
3 |
300 Series, soft seat |
|
|
| CONNECTION SIZES |
04 |
1/2" NPT |
0604 |
3/4" NPT male - 1/2" NPT female |
| VALVE TYPES |
MFC |
Male-Female, Steel |
MFS |
Male-Female, Stainless Steel |
To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these
options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 304-MFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
ORDERING INFORMATION - Additional Options
| SOFT SEATS |
PK1 |
PEEK |
KF1 |
PCTFE |
|
|
| PACKINGS |
P1 |
PTFE |
|
|
|
|
| STEM TIPS |
T1 |
Non-rotating (316 stainless) |
|
|
|
|
| O-RINGS* |
EM1 |
EPDM |
KZ1 |
FFKM (Perfluoroelastomer) |
NB1 |
NBR |
| PANEL MOUNTINGS |
PM1 |
Panel mount (1 nut) |
PM2 |
Panel mount (2 nuts) |
|
|
| HANDLES |
HL4 |
1-3/8" Phenolic |
HL5 |
1-3/4" Phenolic |
|
|
* Other o-ring materials available on request.
† The plug material will always match the material of the valve.
NOTE: Plugs and bleed plugs are available and can be ordered separately.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).
The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 304-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 304-MFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
If you are viewing on a smaller screen or with screen zoom, please use
the horizontal scroll bar at the bottom of this table to see all information.
| SPECIFICATIONS |
| Materials |
Zinc-nickel plated steel, electropolished 316 Stainless Steel |
| Connections |
1/2" NPT to 3/4" NPT Male-female
Straight through porting for bidirectional, high capacity flow |
| Pressure ratings |
6,000 psi @ 200 °F |
| Orifice size |
0.187" |
| Flow coefficient |
CV 0.64 |
| Steam seal & type |
All 316 Stainless Steel stems with FKM o-ring and PTFE back-up ring below the threads, PTFE
packing optional |
| Options |
Panel mountings, o-ring materials, handles, packings, regulating stem and stem tips |
| Weight |
Approximately 2.2 lb. |
All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.
Convert to PT Series
NEW
.jpg)
