- Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
- Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be removed without disturbing the permanent piping installation
- Block valve is located on the left side and the bleed valve is located on top in a 90° orientation, venting is to the right
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 200002/200402 Series hard seat valves have 10,000 psi pressure rating @ 200 ºF
- 210002/210402 Series soft seat valves have 6,000 psi pressure rating @ 200 ºF
- 210002/210402 Series valves also feature a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- PCTFE or PEEK soft seat optional
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
- All stems are 316 Stainless Steel
- Stem and bonnet threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems (non-packing)
If you are viewing on a smaller screen or with screen zoom, please use
the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES |
2 |
2-valve |
|
|
|
|
| SEATS |
0 |
Hard seat |
1 |
Soft seat |
|
|
| PROCESS TYPE |
0 |
Static pressure |
|
|
|
|
| CONNECTIONS |
0 |
Flange-flange |
2 |
1/4" NPT-flange |
4 |
1/2" NPT-flange (standard) |
| VALVE TYPES |
MFC |
Flange-Female, Steel |
MMS |
Flange-Flange, Stainless Steel |
MMCL |
Flange-Flange, Steel, Left Vent |
| MFS |
Flange-Female, Stainless Steel |
MFCL |
Flange-Female, Steel, Left Vent |
MMSL |
Flange-Flange, Stainless Steel, Left Vent |
| MMC |
Flange-Flange, Steel |
MFSL |
Flange - Female, Stainless Steel, Left Vent |
|
|
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 200402-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: T1 Hard non-rotating (316 Stainless standard) stem tip is the only option available on the 210002/210402 Series soft seat version.
ORDERING INFORMATION - Additional Options
| PACKINGS† |
P1 |
PTFE |
P2 |
Graphite ** |
|
|
| STEM TIPS |
T1 |
Non-rotating (316 stainless) |
T6 |
Ball (carbide)** |
T8 |
Ball (Monel)** |
| T5 |
Ball (440C stainless) ** |
T7 |
Ball (ceramic)** |
T9 |
Non-rotating regulating (316 Stainless)** |
| O-RINGS* |
EM1 |
EPDM |
KZ1 |
FFKM (Perfuoroelastomer) |
NB1 |
NBR |
| HANDLES |
HL1 |
1-13/16" Mini "T" |
HL4 |
1-3/8" Phenolic |
|
|
| |
HL3 |
1" Round knurled |
HL5 |
1-3/4" Phenolic |
|
|
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.
* Other o-ring materials available on request.
** For hard seat only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8" mini “T” handle (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 200402-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 200402-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: T1 Hard non-rotating (316 Stainless Steel standard) stem tip is the only option available on the 210002/210402 Series soft seat version.
If you are viewing on a smaller screen or with screen zoom, please use
the horizontal scroll bar at the bottom of this table to see all information.
| SPECIFICATIONS |
| Materials |
Zinc-nickel plated steel, electropolished 316 Stainless Steel |
| Connections |
200002/210002 Series: Flange-flange, 1/4" NPT vent
200402/210402 Series: 1/2" NPT-flange, 1/4" NPT vent
200202/210202 Series: 1/4" NPT-flange, 1/4" NPT vent
Left venting optional |
| Pressure ratings* |
Hard Seat: 10,000 psi @ 200 °F
Soft Seat: 6,000 psi @ 200 °F |
| Orifice size |
0.187" |
| Flow coefficient |
Hard Seat: CV 0.44
Soft Seat: CV 0.76 |
| Stem seal & type |
All 316 Stainless Steel stems with FKM o-ring and type PTFE back-up ring below the threads, PTFE or Graphite packing optional |
| Options |
Panel mountings, o-ring materials, handles, packings, regulating stem and stem tips |
| Weight |
Approximately 2.5 lb. |
* If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.
All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.
Convert to PT Series
NEW
.jpg)
