• Can be used to reposition the dial face for better viewing
• Can be helpful when installing a thermometer where space is limited

• Certified calibration provides the user with a serial numbered thermometer along with a calibration sheet against a primary temperature standard
• Traceable to the National Institute of Standards and Technology

• Available only on 50-310 and 50-320 model allows up close daylight and/or distant night time viewing 5" Adjustable angle or back connect
• Reflective Pointer
• Two reflective clips included to indicate custom minimum and maximum limits  

A variety of lens options are available on many NOSHOK gauges as a production option:

• Instrument glass lenses
• Laminated safety glass lenses
• Acrylic lenses
• Homalite lenses (resistant to many industrial solvents)
•  A Steel or Stainless case and cover ring may be required when other than acrylic lenses are utilized

• The MIP2 allows you to view your minimum and maximum temperatures for visual clarification of safe operation
• Available only on 30-310 and 50-310 model

• The MIP allows you to view your minimum or maximum temperatures for visual clarification of safe operation
• Available only on 30-310 and 50-310 models (MIP)

• Various sizes and types of mounting flanges are available

• For applications where severe vibration may be a factor
• Silicone dampens and lubricates the internal mechanism thus reducing pointer oscillation and premature wear
• Maximum case temperature not to exceed 300 °F (150 °C)
• Polycarbonate lens is standard with Silicone Fill
• 100 Series Bimetal Thermometers: Available for 20-110, 30-110 and 50-110 bimetal thermometer models only, for ranges from -50 °F (-45 °C) to 500 °F (260 °C)
• 150 Series Bimetal Thermometers: Available for 20-150 bimetal thermometer model only, for ranges from -50 °F (-45 °C) to 500 °F (260 °C)
• 300 Series Bimetal Thermometers: Available for all 300 Series bimetal thermometer models, for ranges from -50 °F (-45 °C) to 500 °F (260 °C)

• Special ranges and dials with company names, company logos, part numbers, telephone numbers, or almost any custom layout is available

• The 304 Series Stainless Steel stem is welded at the tip and case for hermetic seal
• 1/4" (6.35 mm) diameter is standard for lengths up to 24" (609 mm)
• 3/8" diameter, sharp tip options and optional 316SS wetted parts are also available

Thermowells allow a temperature instrument to be removed and replaced without shutting down and draining the process, and reduce the possibility of damage to the temperature instrument.

View NOSHOK Thermowells

NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.

View NOSHOK's Digital Indicators offering

• Screw cover
• Meet NEMA requirements for indoor or outdoor use providing protection against dust, rain, splashing and hose-directed water
• Easy access, one-turn caps
• Accept standard and DIN terminal blocks and transmitters
• Provide greater volume for ease of field wiring

View Ordering Information

View Part Number Example

• Provided with a steatite ceramic base, brass terminal pieces, and stainless steel screws
• Not rated for high voltage use
• Can be used in temperature sensor or low voltage Class 2 circuits

View Ordering Information

View Part Number Example

 NOSHOK's Probe Type Industrial RTD is available with a variety of fitting sizes and probe diameters.

View NOSHOK Probe Type Industrial RTD

Thermowells allow a temperature instrument to be removed and replaced without shutting down and draining the process, and reduce the possibility of damage to the temperature instrument.

View NOSHOK Thermowells