NOSHOK'S COVID-19 Response

Manifold Valves

Home » Products » Valves » Manifold Valves » 5-Valve Natural Gas » 5040/5090 Series 5-Valve Power Pattern & Natural Gas Manifold Valves, Compact Style Hard Seat

5040/5090 Series 5-Valve Power Pattern & Natural Gas Manifold Valves, Compact Style Hard Seat

REQUEST A QUOTE
  • Compact style, power pattern is designed for use with differential pressure transmitters incorporating two isolation valves, one equalizing valve and two vent valves in power pattern applications
  • Compact style, natural gas flow is designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve in natural gas applications
  • 100% helium leak tested to 1 x 10-4 ml/s for performance and reliability
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Labeled and color coded vinyl dust caps for bonnets and stems

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION
SERIES 5 5-valve        
SEAT 0 Hard seat        
PROCESS TYPE 4 Compact style, differential pressure 9 Compact style, natural gas flow    
CONNECTION 0 1/2" NPT standard        
VALVE TYPES MFS Flange-Female, Stainless Steel (MSS SP-99 spacing) MFS-CP Flange-Female, Stainless Steel (CoplanarTM spacing)

Please consult your local NOSHOK Distributor of NOSHOK, Inc. for availability and delivery information.

ORDERING INFORMATION - ADDITIONAL OPTIONS
PACKINGS P1 PTFE P2 Graphite    
STEAM TIPS T1 Non-rotating (316 Stainless) T6 Ball (carbide) T8 Ball (Monel)
T5 Ball (440C Stainless) T7 Ball (ceramic) T9 Non-rotating regulating (316 Stainless)
O-RINGS* EMI EPDM KZ1 FFKM (Kalrek® 3018 or equivalent) NB1 NBR

* Other o-ring materials available on request.

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

SPECIFICATIONS
Materials Electropolished 316 Stainless Steel*
Connections 1/2" NPT-flange
Pressure ratings 6,000 psi @ 200 °F
Orifice size 0.125"
Flow coefficient CV 0.30
Stem seal & type All 316 Stainless Steel stems with FKM o-ring and PTFE back-up ring below the threads, PTFE or Graphite packing optional
Options Packings, regulating stem and stem tips o-ring materials and handles
Weight Approximately 4.4 lb.

* All 316SS products meet the requirements of NACE MR0175/ISO 15156-3.

Dimensions Download Data Sheet Flow Schematic Frequently Asked Questions Reference Information Warranty Information

Options & Accessories

Dielectric Kits DK Series

Dielectric Kits are designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection. Dielectric Kits provide a non-conductive barrier between the process piping and the instrument and isolate components from the effects of electrical current. By eliminating metal-to-metal contact, current is halted to prevent corrosion and aid in the cathodic protection of the system.

  • One Piece Dielectric Gasket, Pair, Steel, Delrin® (DK1)
  • One Piece Dielectric Gasket, Pair with Stainless Steel Bolts, Stainless Steel, Delrin® (DK1-SS)
  • PTFE Gasket with Dielectric Shim, Pair, Steel, PTFE, PVC (DK2)

DK1

  • Single piece design combining a Delrin® sealing gasket and Delrin® dielectric shim
  • Bolts, washers and dielectric bushings are included with the kits
  • Cannot be used in conjunction with seal rings or o-rings
  • Seal rings or o-rings not required

DK2

  • Used as an alternative to a one-piece design when a separate sealing gasket or o-ring is required
  • Two piece design consisting of a PTFE sealing gasket and PVC dielectric shim
  • Bolts, washers and dielectric bushings are included with the kits

Specifications:

  • Material: Delrin®, PVC
  • Max operating temp 150 °F
  • Dielectric strength exceeds 1/32 air arc gap approximately 2,500 Vdc

All 316SS products meet the requirements of NACE MR0175/ISO 15156-3.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

O-Ring Options

  • Aflas (AF1)*                 
  • Kalrez 3018 (KZ1)*                  
  • Kalrez 4079 (KZ2)*                        
  • Simriz 89D (KZ3)*     
  • Kalrez 7075 (KZ4)*     
  • Elast O Lion (EL1)*                 
  • EPDM 80 (EM1)*
  • EPDM 90 (EM2)*
  • EPDM 70 (EM3)*
  • NBR 70 (NB1)*
  • EPDM 70 (EM1)**
  • Kalrez 4079 (KZ2)**
  • Elast O Lion (EL1)**
  • Low Temperature FKM (VT1)*
  • Low Temperature FKM (VT2)**

* For 1/8" NPT to 1/2" NPT only        
** For 3/4" NPT to 1-1/2" NPT only

Warranty Information - Accessories

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Application Insights Articles