Type 12 Sanitary, Clamped-Style, ASME-BPE, Non-Replaceable Diaphragm Seals

• 1/4" NPT X 1/4" NPT Cooling Element (1/4" NPT X 1/4" NPT-CE)
• 1/2" NPT X 1/2" NPT Cooling Element (1/2" NPT X 1/2" NPT-CE)
• Works in combination with diaphragm seal to isolate instrument from high media temperatures
• Recommended for process temperatures above 212 °F
• Requires direct mounted system
• Effective temperature reductions of 200 °F depending upon ambient conditions
• High >212 °F process temperature, low < -40 °F process temperature
• All Stainless Steel construction

---

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Glycerin (GY) *
• Silicone (SL)
• Halocarbon^® (HL)
• Neobee M20 (NB)
• Mineral Oil (MO)
• Propylene Glycol (PG)

* Not recommended for use in vacuum applications.

NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.

View NOSHOK Distribution Manifolds

• 5 ft. SS Armored Flexible Capillary, 1/4" NPT (AC-02-02-5) per ft. adder (AC-02-02-#)
• 5 ft. SS Armored Flexible Capillary, 1/2" NPT (AC-04-04-5) per ft. adder (AC-04-04-#)
• Stainless Steel capillaries available with or without Stainless Steel armor
• Protects the instrument from high or low process temperatures
• Allows remote mounting of pressure instrument(s)
• Select the shortest capillary length possible, as changes in ambient temperature conditions may significantly affect the accuracy and response time of the instrument
• Standard length 5', others available
• Installation on analog gauges requires a gauge support and gauge adaptor, or other surface mounting provisions
• Any level difference between the instrument and the seal will result in a pressure indication error; make sure to compensate for the level difference during calibration of the diaphragm seal assembly if the level difference is known
• Filling options for capillaries
  • Silicone - specify to 10 or 20 feet (SL-C)
  • Halocarbon^® - specify to 10 or 20 feet (HL-C)

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

---

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Clamp-style fittings are constructed of T304 Stainless Steel; T316 Stainless Steel on request
• Double hinge design for easy installation and removal
• Available in sizes from ¾" to 4"
• Standard pressure rating of 500 psi at 70 °F (21 °C); up to 3,000 psi rating on request
• Clamp gaskets are available in NBR, EPDM, PTFE and FKM
• All clamps and gaskets meet FDA and 3A sanitary standards

ASME-BPE SANITARY CLAMP    
1-1/2"  (CR 12)
2"        (CR 16)
2-1/2"  (CR 20)
3"        (CR 24)

NBR GASKET    
1-1/2"  (BG 12)
2"        (BG 16)
2-1/2"  (BG 20)
3"        (BG 24)

PTFE GASKET    
1-1/2"  (TG 12)
2"        (TG 16)
2-1/2"  (TG 20)
3"        (TG 24)

---

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov